Thank you very much for choosing Venen Engel. With the Venen Engel you have given yourself a great gift. We wish you much pleasure with this product!


In order for you to achieve optimal results and be completely satisfied with your purchase, correct application is a prerequisite. For this purpose, we have summarised the most important points that you should bear in mind when using the product.


If you have any questions about the application, accessories, suggestions or criticism of our device, please do not hesitate to contact us:

    Phone +49 (0) 66 64 / 91 96 42

    Mail: service@venenengel.de

    Instagram: www.instagram.com/venenengel/

    By mail: Wellcosan GmbH, Hauptstraße 27, 36381 Schlüchtern, Germany


You are satisfied with your Vein Angel? We would be very pleased about a rating at Trusted Shops, Amazon or on our website 


Table of Content


Alternatively you can watch the following video:

VIDEO



1. Checking the scope of delivery

Each Vein Angel Set consists of the following parts:


Control unit

(Example in the picture: Vein Angel 6 Premium)

Cuff/s (depending on the set purchased)

Remote control

(only Vein Angel 4 Premium, Vein Angel 6 Premium and Vein Angel 8 Premium)

Hose set
Operating instructions




2. Remove transport screw


Before putting the device into operation, it is essential to remove the screw for transport safety. To do this, open the filter cover on the bottom and remove the safety screw. Use the enclosed screwdriver for this purpose.





The screw can then be disposed of without hesitation. If this screw is no longer under the filter cover, our service personnel will have removed it for you before dispatch.


The Vain Angel 6 Mobile does not have this screw. It therefore does not have to be removed either :) 




3. Commissioning

3.1 Connecting the cuff plugs

The dark grey cuff plugs are connected to the dark grey sockets on the cuffs and the following light grey cuff plugs to the corresponding light grey sockets on the cuff. 



1. The dark grey plug (top) is plugged into the dark grey socket, the light grey plug (bottom) into the light grey socket.
2. The tubes are therefore connected from the feet towards the body.



3. Connect the plugs to the sockets one by one. Press them firmly into the sockets.
4. Ready :)


Please refer to the article "Connecting the cuff plugs" for more information.


Tip: Do not disconnect the plugs from the cuffs afterwards, but keep the cuffs with connected hoses.


3.2. Connecting the multi-plug


The multi-plug is plugged into the socket on the front or left side of the control unit. Make sure that the multiplug is completely inserted into the unit and is not crooked. There is a small nipple on the multi-plug for checking purposes, which must be inserted into the opening on the unit.


Vein Angel 4 and Vein Angel 4 Premium: the multi plug is plugged in on the side.Vein Angel 6, Vein Angel 6 Premium and Vein Angel 8 Premium: the multiplug is plugged in at the front.




Correctly inserted multiplugIncorrectly inserted multi-plug



In addition, two arrows can be seen on the upper side of the multi-connector. These must be visible on the upper side.


If you need more information about this, especially if you have a Vein Angel 8 Premium, please refer to the article "Connecting the Multiplug".


3.3 Connecting the power supply unit

Insert the mains plug from the control unit into the socket (except Vein Angel 6 Mobile).




4. Start application

4.1 Tighten the cuffs

Put the cuffs on.



Important: Pull the zipper completely up to avoid unintentional opening of the cuffs and possible damage.


For more information, please refer to the article "Properly tightening the cuffs".


Tip: Wear leggings or sweatpants for hygienic use. This way you can share the Venen Engel with others and save yourself the trouble of cleaning the cuffs.


4.2. Switch on the device

Vein Angel 4, Vein Angel 6 and Vein Angel 6 Mobile can be switched on and off with the toggle switch:


If the toggle switch does not light up immediately, do not worry. In some cases, it will not light up until you set the duration of use.


Vein Angel 4 Premium, Vein Angel 6 Premium and Vein Angel 8 Premium Premium can be switched on and off by pressing the on/off button:




4.3 Set pressure

Vein Angel 4 and Vein Angel 6:


Increase pressure: turn clockwise

Reduce pressure: Turn counterclockwise


Vein Angel 4 Premium, Vein Angel 6 Premium, Vein Angel 8 Premium, Vein Angel 6 Mobile:

To reduce pressure: touch the minus symbol (-)

To increase pressure: touch the plus symbol (+)


Further information can be found in the article "Choosing the right application pressure".


4.4 Premium only: Select program + deactivate individual chambers

This step is only necessary for Vein Angel 4 Premium, Vein Angel 6 Premium, Vein Angel 8 Premium and Vein Angel 6 Mobile.



Select a program (A to F) by tapping on the respective letter.


You can find more information in the article "Choosing the right massage program".


Tip: You can exclude pain-sensitive areas from the massage. For more information, please refer to the article "Deactivating individual chambers".


4.5. Select application duration

Vein Angel 4 and Vein Angel 6:



To increase duration: turn clockwise

To reduce duration: Turn counterclockwise


Tip: You can run the application as long as you like by moving the rotary control down to the circle symbol (⟳) / "Always On".


Important: The dials for the time are not "egg timers". This means that the desired application time runs out without the knob turning back to zero. More information can be found in the article "The application time knob does not expire".


Vein Angel 4 Premium, Vein Angel 6 Premium, Vein Angel 8 Premium:


To reduce the duration: press the minus symbol (-)

To increase the duration: press the plus symbol (+)


Tip: Keep the +/- symbols pressed to set the time faster.

For more information, please refer to the article "Choosing the right application duration".




5. Start application

Vein Angel 4 and Vein Angel 6 do not require further adjustment. After setting the time and duration, the device starts working immediately.


For Premium devices, the application is started by pressing ⏯. You can pause the application by pressing ⏯ again. 




6. Common sources of error

The air pressure is too weak

My Vein Angel is very loud

The cuffs inflate in the wrong order or only partially

The application duration knob does not run down

My remote doesn't work

The leg cuff is too big for me


... further help articles can be found here: continue to the Vein Angel Help Center.




7. You do not like the product or you need personal help?

Give us a call at: 

+49 (0) 66 64 / 91 96 42

Write to us: 

Mail: service@venenengel.de

Instagram: www.instagram.com/venenengel/

By mail: Wellcosan GmbH, Hauptstraße 27, 36381 Schlüchtern, Germany




8. Accessories for the Vein Angel

Your leg cuffs or trouser cuffs are too small? You need an additional arm cuff?

Further accessories for the Vein Angel series can be found in our shop.